Team A
For the twenty-third build our we hoped to mount our claw. We also need to make sure our one lift tower is able to handle the weight of the claw. Lastly, we wanted to do a test lift. We may have some trouble achieving our goal, since because of incorrect spacing, we may be unable to attach the claw. We'll have two people work on the spacing, one person put a plate on the flat side of the robot. We'd work on attaching the sensors, but we can't until we can stack caps.
Team B
For november 16th's build we have the following goals, we want to mount the lift, finalize the programming, test the robot's functionality, practice driving, mount the brain and finish the wiring, and if possible, we would like to install the shooter/intake. We got Daniel and Sunwoo working of our lift, Ryan and Gio are working on the shooter nad intake subsystems, Liam is finalizing the program and will test it when the engineers finish with the robot.
Team C
During this build our team would like to get our claw and lift ready for the tournament, practice driving, and strengthen the bars for toggling low flags. Some problems we are running into while trying to accomplish these goals include an axle problem that is causing an problem with gears, and some shaft encoder issues. We will replace the axle with a different one and edit a part of our code.
Team D
Today we'll be spending our time prepping for a tournament. There is a lot of work to get done. First we were introduced to an assistant from Southwestern College. After that happened, we did driver tryouts, we concluded that Samuel is to be our driver. During the rest of our build weworked on our robot and autonomous code. We also took some pictures and packed up everything in the truck for the day. it was decided that Samuel, Bradley, and Mya would work on Saturday and prep.
For the twenty-third build our we hoped to mount our claw. We also need to make sure our one lift tower is able to handle the weight of the claw. Lastly, we wanted to do a test lift. We may have some trouble achieving our goal, since because of incorrect spacing, we may be unable to attach the claw. We'll have two people work on the spacing, one person put a plate on the flat side of the robot. We'd work on attaching the sensors, but we can't until we can stack caps.
Team B
For november 16th's build we have the following goals, we want to mount the lift, finalize the programming, test the robot's functionality, practice driving, mount the brain and finish the wiring, and if possible, we would like to install the shooter/intake. We got Daniel and Sunwoo working of our lift, Ryan and Gio are working on the shooter nad intake subsystems, Liam is finalizing the program and will test it when the engineers finish with the robot.
Team C
During this build our team would like to get our claw and lift ready for the tournament, practice driving, and strengthen the bars for toggling low flags. Some problems we are running into while trying to accomplish these goals include an axle problem that is causing an problem with gears, and some shaft encoder issues. We will replace the axle with a different one and edit a part of our code.
Team D
Today we'll be spending our time prepping for a tournament. There is a lot of work to get done. First we were introduced to an assistant from Southwestern College. After that happened, we did driver tryouts, we concluded that Samuel is to be our driver. During the rest of our build weworked on our robot and autonomous code. We also took some pictures and packed up everything in the truck for the day. it was decided that Samuel, Bradley, and Mya would work on Saturday and prep.